Guides · 8 min
120 vs 220 Film: What Works in Medium-Format Cameras?
Can you use 120 film in a 220 back? Learn how backing paper, pressure plates, counters and film magazines affect compatibility.
Loading article…
Guides · 8 min
Can you use 120 film in a 220 back? Learn how backing paper, pressure plates, counters and film magazines affect compatibility.
Loading article…
120 and 220 roll film have the same nominal width and use the same general spool format, but they are not universally interchangeable. With 120, backing paper runs behind the image-bearing film. With conventional 220, paper protects the beginning and end of the roll, but not the exposures themselves. The longer film strip provides more frames, while the missing backing layer changes film support and winding requirements.
A camera designed for both types may have a reversible pressure plate, a selectable setting or dedicated inserts. A roll fitting inside the spool chamber establishes only physical fit—not correct film-plane position, frame spacing, exposure counting or light protection.
| Feature | 120 film | 220 film |
|---|---|---|
| Nominal film width and spool | Medium-format roll film | Same nominal width and spool type |
| Paper construction | Backing paper behind the full film length | Paper leader and trailer; no paper behind the image area |
| Standard 6×6 capacity | Usually 12 frames | Usually 24 frames |
| Negative size | Determined by the camera's film gate | Same size with the same film gate |
| Required transport | Correct 120 pressure plate, start position and counting | Correct 220 support, start position and counting |
| Red-window frame numbers | Printed on compatible 120 backing paper | Not available beneath the exposed part of the film |
The extra exposures on 220 do not make its individual negatives larger. A 6×6 camera still produces 6×6 images; a 6×7 camera still produces 6×7 images. The benefit was fewer film changes during a session.
The difference is also not a question of ISO speed or colour versus black-and-white film. Those properties depend on the particular emulsion, independently of whether the roll is 120 or 220.
A camera must hold the emulsion flat at the intended film plane. With 120 film, backing paper travels behind the film across the exposure gate. With 220, the image-bearing section passes through without that layer.
Some cameras compensate for that change in thickness with a two-position pressure plate. Other systems use separate 120 and 220 film inserts or magazines with different mechanical arrangements. The wrong arrangement may lead to poor film flatness, incorrect focus at the film plane or uneven frame spacing; an apparently compatible spool cannot rule out those problems.
This is a practical compatibility issue, not a change in the lens mount. A lens can operate perfectly while the wrong film transport or pressure-plate setup produces poor negatives.
A 120 camera's counter may stop after its normal number of frames. On 220 film, that could leave a substantial part of the roll unused. Conversely, a 220 back loaded with shorter 120 film may continue advancing after the last exposed frame.
The point at which the film is aligned for the first exposure can also differ. A camera with separate 120 and 220 loading marks is telling you that the leader length and frame positioning are not interchangeable.
Some early roll-film cameras use a red window to read printed numbers on the backing paper. Traditional 220 does not provide a protective backing layer or the required frame numbers beneath the image area. Do not load 220 into an unmodified red-window camera. The window can admit light to the film, and the normal frame-counting method will not work.
Covering a window by itself does not fix the pressure plate or provide a correct advance mechanism. Any historical workaround is model-specific, not a general compatibility rule.
The Yashica Mat-124G was designed for both 120 and 220 roll film. Its original instruction booklet specifies a sliding pressure plate with two marked positions: 12 EX. for 120 and 24 EX. for 220.
It also identifies different loading-start indicators: green for 120 and red for 220. The manufacturer warns that an incorrectly seated pressure plate may cause irregular film feeding or poor focus.
For the Mat-124G, confirm that the pressure plate is seated fully and that its window shows green 12 EX. for 120 or red 24 EX. for 220. Use the film type's matching triangular start mark before closing the back. The manual does not describe this as an interchangeable film magazine.
The Mamiya RB67 Pro-S is a modular 6×7 system. Mamiya specifies different 6×7 roll-film inserts for 120 (10 frames) and 220 (20 frames). The Pro-S 6×7 outer cassette accepts the corresponding Pro-S 120 or 220 insert; this does not make either insert interchangeable with the outer cassette of the earlier RB67 holder. The relevant compatibility is between the exact cassette and insert, not simply between two RB67 bodies.
This matters when buying used accessories. A seller might describe a complete back, an outer cassette or an insert as a “film holder,” even though those are not the same component.
Mamiya also offered a separate 6×7 Power Drive Roll Film Holder with a selectable 120/220 pressure-plate position and corresponding 10/20-frame counting. That adjustment belongs to this specifically named accessory; ordinary Pro-S holders use film-type-specific inserts. Do not generalize the Power Drive mechanism to all RB67 backs.
Check the exact holder name, insert and generation before loading film or purchasing a replacement.
The Hasselblad 500C/M is frequently paired with an A12 magazine for twelve 6×6 exposures on 120 film. The related A24 magazine was designed for twenty-four 6×6 exposures on 220 film.
A12 and A24 are not merely two labels for a counter setting. Ernst Wildi documents differences in their transport gearing and pressure-plate spring arrangement. These compensate for the film-and-paper thickness of 120 versus the unbacked image area of 220; the camera body's lens mount remains unchanged.
Wildi describes a historical workaround in which 120 film can be exposed in an A24, but the final frame gaps become wider and the first frame sits close to the leader. The magazine was designed for 220, not optimum 120 positioning. Treat the method as a qualified exception, especially when image quality or a valuable roll matters; the normal choice is an A12 for 120 film.
The letter A also matters. The later automatic A12, A16 and A16S magazines are distinct from earlier non-automatic magazines engraved 12, 16 and 16S. Wildi says 220 cannot be used normally in the automatic A12/A16/A16S because their counters cannot be reset as the longer roll requires. Do not confuse these generations from the numbers alone.
Sometimes, but only if the specific back and loading procedure permit it. Both rolls can fit similar spool chambers, yet a 220 back may position the film differently or continue counting long after the 120 roll is finished.
The A24 workaround does not establish blanket compatibility for other Hasselblad backs, Mamiya inserts or Bronica magazines. On an interchangeable-back camera, a magazine may mount on the camera mechanically yet remain unsuitable for the particular film loaded into it. Check the full combination: body, back shell, insert and film.
If the original manual specifies a dedicated 120 insert, use that insert. For a valuable or irreplaceable shoot, do not rely on untested advice about changing start marks or winding past the counter.
Do not assume so. The risks depend on the design:
A red-window camera may fog film and cannot read 220 frame numbers normally.
A 120-only counter may stop midway through a 220 roll.
A 120-only pressure plate or insert may not support the unbacked film section as intended.
A compatible-looking magazine or spool does not prove that the body and back function together.
A historical exception is documented for older non-automatic Hasselblad 12, 16 and 16S magazines. Wildi describes using 220 with a light-tight cover over the rear inspection window and generation-specific loading and counter procedures. Those older magazines must not be confused with the automatic A12, A16 and A16S, which do not provide the same normal 220 operation. These special procedures are not instructions for any arbitrary 120-only camera.
First, read the camera's model name and the film holder's own designation. On a modular system, the back can be more important to the film format than the camera body.
Next, inspect the pressure plate and its markings. A switch labelled 120/220 or 12/24 is significant only when it is an original, correctly operating part of that camera. Check whether the frame counter and loading-start arrows also change.
Examine the dark slide and light seals of removable magazines. If a red window is present, verify that the film's backing paper and numbering method are appropriate.
Finally, test with a noncritical roll when you have reason to doubt the mechanism. Watch for irregular advance, unusually tight winding, inconsistent spacing or missing frames. Do not force a stiff transport and do not open a partly exposed roll in daylight.
For collectors, document the exact back or insert along with the camera model. A “Hasselblad 500C/M with A24” or an “RB67 Pro-S with 120 insert” is a more useful record than the camera body name alone.
120 and 220 use the same nominal roll width, but different backing paper, pressure-plate requirements, start positions and winding systems can make them functionally incompatible. Check the exact model of camera and film back or insert in its instructions, rather than judging by the spool alone. Documented Hasselblad exceptions are not substitutes for the correctly matched magazine.
Use Camera_DATA to identify and compare medium-format camera models before assembling or recording your film-back setup.
Loading article links…
120 and 220 roll film have the same nominal width and use the same general spool format, but they are not universally interchangeable. With 120, backing paper runs behind the image-bearing film. With conventional 220, paper protects the beginning and end of the roll, but not the exposures themselves. The longer film strip provides more frames, while the missing backing layer changes film support and winding requirements.
A camera designed for both types may have a reversible pressure plate, a selectable setting or dedicated inserts. A roll fitting inside the spool chamber establishes only physical fit—not correct film-plane position, frame spacing, exposure counting or light protection.
| Feature | 120 film | 220 film |
|---|---|---|
| Nominal film width and spool | Medium-format roll film | Same nominal width and spool type |
| Paper construction | Backing paper behind the full film length | Paper leader and trailer; no paper behind the image area |
| Standard 6×6 capacity | Usually 12 frames | Usually 24 frames |
| Negative size | Determined by the camera's film gate | Same size with the same film gate |
| Required transport | Correct 120 pressure plate, start position and counting | Correct 220 support, start position and counting |
| Red-window frame numbers | Printed on compatible 120 backing paper | Not available beneath the exposed part of the film |
The extra exposures on 220 do not make its individual negatives larger. A 6×6 camera still produces 6×6 images; a 6×7 camera still produces 6×7 images. The benefit was fewer film changes during a session.
The difference is also not a question of ISO speed or colour versus black-and-white film. Those properties depend on the particular emulsion, independently of whether the roll is 120 or 220.
A camera must hold the emulsion flat at the intended film plane. With 120 film, backing paper travels behind the film across the exposure gate. With 220, the image-bearing section passes through without that layer.
Some cameras compensate for that change in thickness with a two-position pressure plate. Other systems use separate 120 and 220 film inserts or magazines with different mechanical arrangements. The wrong arrangement may lead to poor film flatness, incorrect focus at the film plane or uneven frame spacing; an apparently compatible spool cannot rule out those problems.
This is a practical compatibility issue, not a change in the lens mount. A lens can operate perfectly while the wrong film transport or pressure-plate setup produces poor negatives.
A 120 camera's counter may stop after its normal number of frames. On 220 film, that could leave a substantial part of the roll unused. Conversely, a 220 back loaded with shorter 120 film may continue advancing after the last exposed frame.
The point at which the film is aligned for the first exposure can also differ. A camera with separate 120 and 220 loading marks is telling you that the leader length and frame positioning are not interchangeable.
Some early roll-film cameras use a red window to read printed numbers on the backing paper. Traditional 220 does not provide a protective backing layer or the required frame numbers beneath the image area. Do not load 220 into an unmodified red-window camera. The window can admit light to the film, and the normal frame-counting method will not work.
Covering a window by itself does not fix the pressure plate or provide a correct advance mechanism. Any historical workaround is model-specific, not a general compatibility rule.
The Yashica Mat-124G was designed for both 120 and 220 roll film. Its original instruction booklet specifies a sliding pressure plate with two marked positions: 12 EX. for 120 and 24 EX. for 220.
It also identifies different loading-start indicators: green for 120 and red for 220. The manufacturer warns that an incorrectly seated pressure plate may cause irregular film feeding or poor focus.
For the Mat-124G, confirm that the pressure plate is seated fully and that its window shows green 12 EX. for 120 or red 24 EX. for 220. Use the film type's matching triangular start mark before closing the back. The manual does not describe this as an interchangeable film magazine.
The Mamiya RB67 Pro-S is a modular 6×7 system. Mamiya specifies different 6×7 roll-film inserts for 120 (10 frames) and 220 (20 frames). The Pro-S 6×7 outer cassette accepts the corresponding Pro-S 120 or 220 insert; this does not make either insert interchangeable with the outer cassette of the earlier RB67 holder. The relevant compatibility is between the exact cassette and insert, not simply between two RB67 bodies.
This matters when buying used accessories. A seller might describe a complete back, an outer cassette or an insert as a “film holder,” even though those are not the same component.
Mamiya also offered a separate 6×7 Power Drive Roll Film Holder with a selectable 120/220 pressure-plate position and corresponding 10/20-frame counting. That adjustment belongs to this specifically named accessory; ordinary Pro-S holders use film-type-specific inserts. Do not generalize the Power Drive mechanism to all RB67 backs.
Check the exact holder name, insert and generation before loading film or purchasing a replacement.
The Hasselblad 500C/M is frequently paired with an A12 magazine for twelve 6×6 exposures on 120 film. The related A24 magazine was designed for twenty-four 6×6 exposures on 220 film.
A12 and A24 are not merely two labels for a counter setting. Ernst Wildi documents differences in their transport gearing and pressure-plate spring arrangement. These compensate for the film-and-paper thickness of 120 versus the unbacked image area of 220; the camera body's lens mount remains unchanged.
Wildi describes a historical workaround in which 120 film can be exposed in an A24, but the final frame gaps become wider and the first frame sits close to the leader. The magazine was designed for 220, not optimum 120 positioning. Treat the method as a qualified exception, especially when image quality or a valuable roll matters; the normal choice is an A12 for 120 film.
The letter A also matters. The later automatic A12, A16 and A16S magazines are distinct from earlier non-automatic magazines engraved 12, 16 and 16S. Wildi says 220 cannot be used normally in the automatic A12/A16/A16S because their counters cannot be reset as the longer roll requires. Do not confuse these generations from the numbers alone.
Sometimes, but only if the specific back and loading procedure permit it. Both rolls can fit similar spool chambers, yet a 220 back may position the film differently or continue counting long after the 120 roll is finished.
The A24 workaround does not establish blanket compatibility for other Hasselblad backs, Mamiya inserts or Bronica magazines. On an interchangeable-back camera, a magazine may mount on the camera mechanically yet remain unsuitable for the particular film loaded into it. Check the full combination: body, back shell, insert and film.
If the original manual specifies a dedicated 120 insert, use that insert. For a valuable or irreplaceable shoot, do not rely on untested advice about changing start marks or winding past the counter.
Do not assume so. The risks depend on the design:
A red-window camera may fog film and cannot read 220 frame numbers normally.
A 120-only counter may stop midway through a 220 roll.
A 120-only pressure plate or insert may not support the unbacked film section as intended.
A compatible-looking magazine or spool does not prove that the body and back function together.
A historical exception is documented for older non-automatic Hasselblad 12, 16 and 16S magazines. Wildi describes using 220 with a light-tight cover over the rear inspection window and generation-specific loading and counter procedures. Those older magazines must not be confused with the automatic A12, A16 and A16S, which do not provide the same normal 220 operation. These special procedures are not instructions for any arbitrary 120-only camera.
First, read the camera's model name and the film holder's own designation. On a modular system, the back can be more important to the film format than the camera body.
Next, inspect the pressure plate and its markings. A switch labelled 120/220 or 12/24 is significant only when it is an original, correctly operating part of that camera. Check whether the frame counter and loading-start arrows also change.
Examine the dark slide and light seals of removable magazines. If a red window is present, verify that the film's backing paper and numbering method are appropriate.
Finally, test with a noncritical roll when you have reason to doubt the mechanism. Watch for irregular advance, unusually tight winding, inconsistent spacing or missing frames. Do not force a stiff transport and do not open a partly exposed roll in daylight.
For collectors, document the exact back or insert along with the camera model. A “Hasselblad 500C/M with A24” or an “RB67 Pro-S with 120 insert” is a more useful record than the camera body name alone.
120 and 220 use the same nominal roll width, but different backing paper, pressure-plate requirements, start positions and winding systems can make them functionally incompatible. Check the exact model of camera and film back or insert in its instructions, rather than judging by the spool alone. Documented Hasselblad exceptions are not substitutes for the correctly matched magazine.
Use Camera_DATA to identify and compare medium-format camera models before assembling or recording your film-back setup.